Assembly – Poulan 964 77 50-00 Manuel d'utilisation
Page 6
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
ASSEMBLY
NOTE: When right hand (R.H.) and left hand (L.H.) are mentioned in this manual, it means when you are seated on the
tractor, in the operator’s position.
(1)3/8” Wrench
(1) Drive Ratchet
THESE ARE THE TOOLS YOU WILL NEED TO i'*)
Wrench
(1)3" or longer Extension
ASSEMBLE YOUR GRASS CATCHER:
(^) Wrenches
(1) Short Handle
(1)
1/2" Socket
Phillips Screwdriver
(1)9/16" Deep well Socket
A
CAUTION: BEFORE ASSEMBLING GRASS CATCHER TO TRACTOR:
•
Depress clutch/brake pedal fully and set parking brake.
•
Place gearshift/motion control lever in neutral (N) position.
•
Place attachment clutch in "DISENGAGED" position.
•
Turn ignition key "OFF" and remove key.
•
Make sure the blade and ail moving parts have completely stopped.
•
Disconnect spark plug wire from spark plug and place wire where it cannot come in contact
with plug.