Biast of steam & spray – Hamilton Beach 840068700 Manuel d'utilisation

Page 7

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

840068700 2v05.qxd 5/15/00 2:53

Page

Biast of Steam & Spray

1. To use blast of steam, the

Temperature/Steam Dial must be

set in the steam range.

2. To get a blast of steam, press the

Blast of Steam

Button. Do not

press button con­

tinuously. Press

once every two

seconds. Some

time is needed for

the iron to create the steam. Please

use iron carefully, as steam is hot

and can cause bums or serious

injury.

To spray a mist of water, press

the Spray Button to

dampen wrinkles

that are difficult to

remove.

RctrSCtsblO Cord (not available on all models)

1. Press and hold the Cord Release

Button while pulling cord to desired

length. Do not unwind cord beyond

Indicator on cord.

2. To store cord, place the iron, sole-

plate down, on ironing board.

Unlatch Retractable Cord Handle

and wind clockwise.

IMPORTANT! Do not press Cord
Release Button while winding cord.

Only wind clockwise or the cord may

jam. See illustration.

3. If cord jams while winding, push the

Cord Release Button to unwind

slightly until cord is free. Then slowly

start to wind clockwise again.

Advertising