Campbell Hausfeld HousePainter IN423200AV - Manuel (Page 7)

After priming as usual, turn the One
Touch Control to
the roller position
(see Figure 12) and
roll away.
Doors
Your airless
sprayer gives a
beautiful, brush-free finish on all
kinds of doors: entry doors, cabinet
doors, louvered doors, etc. Take the
doors outside or to a well-ventilated
area in a basement or garage.
Protect the surrounding area with a
drop cloth. For efficiency, arrange
the doors so you can paint the sides
as well as the front or back surface. To
achieve a good spray pattern, use the
lowest pressure setting on your
sprayer.
Step 1 – Priming
Place both the suction and bypass
tubes in the coating container (see
Figure 13). Use the 1-gallon set of
tubes for 1-gallon paint containers,
and the 5-gallon set for 5-gallon paint
containers. Turn the One Touch
7
EZ5000 Series
www.chpower.com
Set-Up
(Cont.)
To extend your reach for floors and
ceilings, consider using the 24”
Spray Wand accessory, which attach-
es between the gun and tip. For
floors, it angles the tip away from
your feet, while allowing a comfort-
able spraying position for your arm
and back. For ceilings, it keeps the
spray from being directly overhead
and gives you an extra 2’ that may
eliminate the need for a ladder.
More on Walls
If you aren’t comfortable spraying
interior walls, consider using the
Roller accessory. To use this accessory,
remove the spray tip from the gun
and attach the roller (see Figure 10).
Figure 12 - Icon
showing Roller
position
Figure 11 – Using roller attachment
Figure 10 – Attaching roller
Figure 13 – Suction and bypass tubes