Specifications – Classe Audio CP-700 Manuel d'utilisation
Page 37
37
ENGLISH
Specifications
All specifications are accurate at the time of printing. Classé reserves the right to
make improvements without notice.
■
Frequency response
20 Hz – 200kHz ± 0.1dB
■
Distortion (THD + noise)
0.0012%
■
Maximum input voltage (single-ended)
5Vrms
■
Maximum input voltage (balanced)
10Vrms
■
Maximum output voltage (single-ended)
10Vrms
■
Maximum output voltage (balanced)
20Vrms
■
Gain range
-86dB to +14dB
■
Input Impedance (single ended)
100kΩ
■
Input Impedance (balanced)
200kΩ
■
Output Impedance
100Ω
■
Maximum Input to Noise Floor
120dB
■
Channel separation
130dB at 1kHz
■
Crosstalk (any input to any output)
better than -120dB @ 1kHz
■
Rated power consumption
42W
■
Idle power consumption
29W
■
Mains voltage
determined by the needs of country for which
the unit was manufactured;
cannot be reset by dealer or user
■
Overall dimensions (preamplifier)
Width: 17.5” (445mm)
Depth: 16.5” (419mm)
Height: 4.75” (121mm)
■
Overall dimensions (power supply)
Width: 5” (127mm)
Depth: 12” (305mm)
Height: 5.5” (140mm)
■
Net weight (preamplifier)
23lbs (10.5kg)
■
Net weight (power supply)
10lbs (4.6kg)
■
Shipping weight
45lbs (20.5kg)
For more information, see your Classé dealer, or contact:
Classé Audio
5070 François Cusson
Lachine, Quebec
Canada H8T 1B3
Telephone +1 (514) 636-6384
FAX +1 (514) 636-1428
http://www.classeaudio.com
email: [email protected]
Classé and the Classé logo are trademarks of Classé Audio Inc. of Lachine, Canada. All rights reserved.
i-Command™ is a trademark of Equity International, Inc. All rights reserved.
AMX
®
is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved.
Crestron™ is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved.