Cuisinart DLC-2BKE - Manuel (Page 8)

1. INTRODUCTION
You have just bought a Cuisinart® Food Processor.
This appliance is a quality tool allowing you to realize all kinds of dishes
quickly and easily. It chops, grinds, mashes, emulsifies and mixes
your foods in a few seconds. Its patented blade has a sharpened edge
allowing to chop, mix or mash, while the thicker edge allows to grind
hard foods such as coffee beans or walnuts. The operation by pulses
allows total control on the whole process, whether to chop or to grind.
Equipped with a powerful bi-directional motor, it gets through all the
operations in a few seconds.
Every dish is now within your reach.
2. YOUR APPLIANCE INCLUDES:
1. A bi-directional motor with a vertical shaft and two very practical
pulse operated touch-pad controls.
2. A 0.5 l preparation bowl.
3. A spatula (not illustrated).
4. A lid that can be locked on the bowl. Provided with two openings
to pour liquids during the operation.
5. A patented blade with professional quality and accuracy.
According to its rotation direction, the blade allows you to chop
or to grind foods.
WARNING! THE BLADE IS EXTREMELY SHARP. In order to avoid any
risk of injury when unpacking the appliance, we recommend to handle
the blade with utmost care. Never touch the metal parts and always
hold the blade by its central hub.
3. ASSEMBLY:
1. Place the preparation bowl on the motor shaft. Turn it anticlockwise
to fix it on the motor unit.
2. While holding it through its central hub, place delicately the blade
on the central shaft of the preparation bowl. Line up the marks on
the blade on the shaft form. The blade should be perfectly fit and
in the bottom of the preparation bowl.
3. Place the ingredients in the bowl.
4. Place the lid on the bowl. The lid tongue should be oriented to the
right of the back column. Turn the lid anticlockwise to lock it.
N.B. The appliance starts only if the lid is correctly locked. It stops
instantly when the lid is removed.
5. Connect the appliance. It is now ready to start.
6
Lid (4)
Blade (5)
Bi-directional
motor (1)
Cord wrap
Preparation bowl
(2)
Shaft
(not illustrated)