Note, A warning, How to fill with water – Panasonic NI-WL600 Manuel d'utilisation
Page 6
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
NOTE:
1. The Cover Case cannot be unlocked when you
lift the Cover Case with the Power Base.
2. Please detach the Shock Absorber and Film
before ironing.
HOW TO FILL WITH WATER
A WARNING
Be sure the iron is unpiugged from the electricai outiet before fiiling with water.
The iron can be filled with the Water Tank in place or removed. Confirm that the Steam/Dry
Selector is in the Dry ironing position when installing or removing the Tank.
1. Remove the Water Tank by pressing the Water Tank Release Button.
2. Open the Water Fill Cover.
3. Fill the Water Tank up to the " MAX" line.
DO NOT OVERFILL. Check the water level with the Water Tank held in its vertical position.
4. Close the Water Fill Cover.
5. Re-install the Water Tank into the main unit. Push it until a click sound is heard.
Most tap water can be used in this iron. If water is very hard, distilled or demineralized
water should be used. Do not use water processed through home water softening
systems because this water contains minerals that may be harmful to the iron.
Do not use water additives or substitute water such as linen or scented water in the steam
iron. They can stain fabrics or damage the iron.
^6^