CuiZen Hot Dog Steamer ST-14120 - Manuel (Page 3)

5 4
Main Unit Body
Hot Dog Steam Tray
Drip Tray
Water-Fill Vents
(Left & Right Handle)
Power Indicator Light
60-minute Timer Steamer Base
Water Level Indicator
Lid
Bun Steamer
Compartment
Bun Tray
PARTS DESCRIPTION
READ CAREFULLY BEFORE USING
YOUR HOT DOG STEAMER
BEFORE FIRST USE
- Carefully check appliance voltage rating (AC120V-60Hz) to make sure it is
compatible with your home.
- Thoroughly wash
ALL PARTS of the unit (except Steamer Base) in hot soapy
water. Rinse well and dry completely before assembling.
- Rinse interior of the Steamer Base with hot water and dry thoroughly.
DO NOT IMMERSE STEAMER BASE, ELECTRICAL CORD OR PLUG IN
WATER OR OTHER LIQUID.
- Place unit of a flat, stable and level counter. DO NOT place appliance directly
under kitchen cabinets as the unit generates steam that could damage your
cabinets.
-This appliance and all parts are not made to be used in an oven, microwave oven
or on a cooktop.
WARNING
This product is equipped with a polarized plug (one blade is wider than the other
blade) as a safety feature to reduce the risk of electrical shock and fire.This plug
will fit into a polarized outlet only one way. If you are unable to insert the plug into
the electrical outlet, try reversing the plug. If the plug still does not fit, contact a
qualified electrician. Never use the plug with an extension cord unless the plug can
be fully inserted into the extension cord, making sure the electrical rating of the
extension cord is at least as great as the electrical rating of this appliance (listed on
the bottom panel of the unit). Do not alter plug. Do not attempt to defeat the safety
purpose of the polarized plug.
Two easy ways to add water :
1
Directly into Steamer Base
Water Level Indicator
2
Through
Water-Fill Vent
(Left & Right Handle)
HOW TO COOK YOUR HOT DOGS
Fill the Steamer Base with cold tap water up to desired level, making sure
you do not over-fill, up to Maximum Water Level Indicator (MAX). Water level
should
NEVER be lower than the Minimum Water Level Indicator (MIN).
Assemble your Hot Dog Steamer as follows:
• Place the Drip Tray over the Steamer Base.
• Place the Main Unit Body over the top of the Steamer Base, making
sure the Back Safety Clip of the Main Unit Body is locked in place to
the Base Steamer part. This Safety Clip is a safety feature to hold in
place the Main Body Unit to the Steamer Base.
DO NOT lift appliance
by the side handles.
• Insert the Hot Dog Steam Tray in the Main Unit Body by lifting it slightly
upwards to enable the back stopper-tabs of the Tray to fit in place. The
back stopper-tabs are a safety feature to block Hot Dog Steam Tray
from fully opening when taking out Hot Dogs from the Tray.
• Place Bun Tray in Main Unit Body making sure side Tray Tabs are fac
ing upwards. These Tabs will help you lift out the Tray when cleaning
unit.
• Place up to 12 Hot Dogs in Hot Dog Steam Tray and close the Tray.
• Place up to 12 Buns in Bun Steamer Compartment making sure
not to
block the Steam Vents located in the corners of the Bun Tray,
(Fig 1) enabling steam to fully circulate around the Bun Steamer
Compartment.
HDS Instruction Manual Eng-Fr.indd 4-5 12-07-10 1:47 AM