Ryobi RY15519 - Manuel

1
HOW TO GET STARTED
RYOBI ART WORK
Art Part No. : 987000408 Rev. 01
Where Used : 987000408
Refer to Drawings for Dimensions.
987000408
6-12-08 REV:01
Material: 60lb. Stock Paper.
Color: Lift-off Bright Pink.
FRONT
2
3
4
5
7
8
Carefully remove the product and any accessories from the box. Make sure that all items listed in
the packing list are included.
Align the raised tabs inside the opening on the blower housing with the positioning holes on the attachment shaft. Insert the end of the
attachment shaft into the opening on the blower housing and rotate slightly until the tabs lock into the positioning holes.
Loosen the knob on the coupler of the power head shaft.
6
Push in the button located on the blower attachment. Align the button with the guide
recess on the power head coupler and slide the two shafts together.
Rotate attachment shaft until button locks into the positioning hole.
Tighten the knob securely.
Use the attachment securing cap for the one-time assembly of the blower attachment to the attachment shaft.
Install the attachment securing cap over the end of the attachment shaft as shown.
Make The Most Of Your Purchase!
CALL
1-800-860-4050
www.ry
obitool
s.com
For any questions about operating or maintaining your product, call the Ryobi Help Line !
Your Product has been fully tested prior to shipment to ensure your complete satisfaction.
Troubleshooting tips are available in your operator's manual.
Go to www.ryobitools.com and register your new tool on-line.
To register your Ryobi product or set up your eBox™ account by regular mail, please print the following
information on a 3"x5" card or standard postcard: your name, mailing address, phone numbers, email address,
Ryobi product(s) purchased with item number from package, and serial number for each product.
Mail the card to: Ryobi Technologies, Inc. Attn. Ryobi Registration, 1428 Pearman Dairy Road, Anderson,
SC 29625.To receive information on our company and products, please include the following statement on your
registration card: "Send me information on your products and company using the contact information I am
providing with this product registration."
®
®
Rotate the attachment securing cap clockwise until the shaft is completely secure. When fully secure, the cap cannot be rotated counterclockwise.
Remove the hanger cap from the attachment shaft.
1
2
5
4
3
6 8
7