Petsafe Drinkwell® 360 Pet Fountain - Manuel (Page 11)

www.petsafe.net 11
FR
EN
pump maintenance
Important: Cleaning the Pump is essential to the longevity of the Pet Fountain as well as
the cleanliness of the water. Clean the Pump at least every two weeks. Warranty may be
voided if the Pump is not cleaned regularly.
1. Remove Pump from the Pet Fountain as explained in the “Filters and Pet Fountain
Cleaning” section of this Operating Guide.
2. Once the Pump is out of the Pet Fountain, with your
thumb and forefinger, gently squeeze on either side
of the Faceplate, and pull it off. It may be necessary
to insert a fingernail into the seam of the Faceplate
to pry it off (
fig. 17).
3. Next you will want to remove the Intake Plate by
placing your fingernail under the small lip located
on the narrow side of teardrop-shaped Intake Plate
Pull-Tab and pull out to remove (
fig. 18).
4. Once the Intake Plate is
removed you can also remove
the Impeller (white, 3-bladed
propeller) which is held in
place magnetically. To remove
the Impeller, insert a fingernail
or other slim object underneath
the plastic blade and lift out of
Pump (
fig. 19).
Pump
Impeller
Intake Plate
Faceplate
fig. 17
Intake Plate
Pull-Tab
fig. 18
fig. 19