Programming transmitters to the vehicle, Battery replacement – Cadillac SRX Manuel d'utilisation

Page 86

Advertising
background image

Programming Transmitters to the
Vehicle

Only RKE transmitters programmed to the vehicle
will work. If a transmitter is lost or stolen, a replacement
can be purchased and programmed through your
dealer/retailer. When the replacement transmitter is
programmed to the vehicle, all remaining transmitters
must also be programmed. Any lost or stolen transmitters
no longer work once the new transmitter is programmed.
Each vehicle can have up to eight transmitters
programmed to it. See “RELEARN REMOTE KEY”
under DIC Operation and Displays on page 3-46.

Battery Replacement

Replace the battery if the REPLACE BATTERY
IN REMOTE KEY message displays in the DIC.
See “REPLACE BATTERY IN REMOTE KEY”
under DIC Warnings and Messages on page 3-51.

Notice: When replacing the battery, do not touch
any of the circuitry on the transmitter. Static
from your body could damage the transmitter.

To replace the battery:

1. Separate the transmitter with a flat, thin object

inserted into the notch, located above the
metal base.

2. Remove the old battery. Do not use a metal object.

3. Insert the new battery, positive side facing up.

Replace with a CR2032 or equivalent battery.

4. Snap the transmitter back together.

2-6

Advertising