Magnetic ride control, Limited-slip rear axle, All-wheel drive (awd) system – Cadillac SRX Manuel d'utilisation

Page 238: Steering

Advertising
background image

Magnetic Ride Control™

Vehicles with this feature automatically adjust the ride of
the vehicle based on driving conditions. Magnetic Ride
Control monitors the suspension system to determine the
proper system response. If the controller detects a
problem within the system, the DIC will display a
SERVICE SUSPENSION SYS message. See DIC
Warnings and Messages
on page 3-51 for more
information. See your dealer/retailer for service.

Limited-Slip Rear Axle

Vehicles with a limited-slip rear axle can give more
traction on snow, mud, ice, sand or gravel. It works like a
standard axle most of the time, but when traction is low,
this feature allows the drive wheel with the most traction
to move the vehicle.

All-Wheel Drive (AWD) System

With this feature, engine power is sent to all four wheels
at all times. This is like four-wheel drive, but there is no
separate lever or switch to engage or disengage the front
axle. It is fully automatic, and adjusts itself as needed for
road conditions.

Steering

Power Steering

If you lose power steering assist because the engine
stops or the system is not functioning, you can steer
but it will take much more effort.

Steering Tips

It is important to take curves at a reasonable speed.

Traction in a curve depends on the condition of the tires
and the road surface, the angle at which the curve is
banked, and your speed. While in a curve, speed is the
one factor you can control.

If you need to reduce speed, do it before you enter the
curve, while the front wheels are straight ahead.

Try to adjust the speed so you can drive through the
curve. Maintain a reasonable, steady speed. Wait
to accelerate until you are out of the curve, and then
accelerate gently into the straightaway.

4-8

Advertising