Hand torch – Tweco 7-3476 Manuel d'utilisation

Page 6

Advertising
background image

August 6, 2003 / 6 Août, 2003

6

Manual / Manuel 0-2958

E. Operation

1. Check the torch for proper consumable parts.

CAUTION

The torch parts must correspond with the type of operation. Refer to the Torch manual for proper parts selection.

2. Connect primary input power. Turn on the gas supply.

3. Set proper gas pressure and flow per the Torch Instruction Manual.

4. Install proper consumables per the Torch Instruction Manual.

5. Test for proper operation.

F. ATC Connector Diagram

ATC Female Receptacle

Front View

1

2

3
4

5

6

7

8

5

6

7

8

1

2

3

4

ATC Male Connector

Front View

2- Orange /
PIP

Negative / Plasma

3 - White - Switch -

to Large Socket

4 - Green - Switch-

to Small Pin

3 - White /
Switch

4 - Green /
Switch

1 - Black /
PIP

Pilot

Pilot

Negative / Plasma

6 - Open

7 - Open

5 - Open

8 - Open

6 - Open

7 - Open

8 - Open

5 - Open

HAND TORCH

1 - Black / PIP
to Large Pin

2 - Orange /PIP -

to Small Socket

A-03708

NOTE

Every effort has been made to provide complete and accurate information in this manual. However, the
publisher does not assume and hereby disclaims any liability to any party for any loss or damage caused
by errors or omissions in this Manual, whether such errors result from negligence, accident, or any other
cause.

Advertising