T-Fal Balanced Living Juice Extractor - Manuel (Page 7)

EN
7
Description
Safety system
• This appliance is fitted with a safety mechanism. To start
the juice machine, the cover (C) must be properly secured
by the safety clamp (H). Opening the safety clamp (H) will
stop the juice machine. At the end of a cycle, place the
control switch
(I) to 0 and wait until the sieve (D) stops
completely before removing the cover.
Before first use
• We recommend that you wash all the removable parts
(A, B,C, D, E, G, L, M, N) in warm soapy water (see paragraph
”Cleaning”). Rinse and dry them carefully.
• Unpack the appliance and place it on a solid, stable work
surface.
• Ensure that all packaging has been removed before starting
the appliance.
Using the appliance
• Fit the juice collector (E) in the appliance, tipping it slightly
forward to pass the pouring spout through the hole provided
(see Fig. 1).
• Place the sieve (D) in the juice collector (E). Ensure that the
sieve is properly clipped onto the drive shaft (J). You can hear
an audible click when the sieve is positioned correctly (see
Fig. 2).
A Pusher
B Feed tube
C Cover
D Sieve
E Juice collector
F Pouring spout with flow-stop system
G Pulp collector
H Safety clamp I Control switch (2 speeds)
J Drive shaft
K Motor unit
L Juice jug cover
M Foam separator
N Juice jug
O Brush
P Cord storage