Bell Sports Helmet - Manuel (Page 6)

comfort and helmet stability while riding. Make any minor adjustments to the fit
pads and straps to improve comfort or stability.
WARNING! If you cannot adjust the
helmet so that it fits correctly according
to these instructions or so that it is
comfortable and stable while riding, DO
NOT USE IT. Return it to your dealer or
call 1-800-456-BELL for assistance.
Helmets With Visors
Some helmets come with removable snap-on visors. To remove visor, follow these
steps:
1. Pull the ends of the visor loose from the helmet and then lift away from
the helmet.
CAUTION: DO NOT try to remove the visor
by pulling forward on the center. This will
damage the helmet and the visor.
2. To replace the visor, center it on the helmet and then snap the pins (A) on the
visor into the holes (B) in the helmet, Figure 12
For helmets equipped with a Blade ™ visor attachment, the receptor holes left
behind by the removed visor may be covered by the small Bell ellipse plugs that
are supplied. Simply snap the Bell ellipse plugs into the receptor holes in the
helmet for a clean, streamlined look, Figure 13.
Caring for Your Helmet
Cleaning Helmets are made of materials that can be damaged by many com-
monly available cleaners. Petroleum based solvents or
cleaners are especially dangerous. They can damage a helmet
so that its protective capabilities are significantly reduced. Many
5
ENGLISH
A
B
Figure 12 Figure 13