Blomberg WNF 7402 WE20 - Manuel (Page 13)

13 EN
Auxiliary function selection
Select the desired auxiliary functions before starting
the programme. Furthermore, you may also select
or cancel auxiliary functions that are suitable to the
running programme by pressing the Start / Pause
/ Cancel button when the machine is operating.
For this, the machine must be in a step before the
auxiliary function you are going to select or cancel.
Depending on the programme, press a, b, c or
d buttons to select the desired auxiliary function.
Symbol of the selected auxiliary function appears on
the display.
C Some functions cannot be selected together.
If a second auxiliary function conflicting with
the first one is selected before starting the
machine, the function selected first will be
canceled and the second auxiliary function
selection will remain active. For example,
if you want to select Quick Wash after you
have selected the Prewash, Prewash will be
canceled and Quick Wash will remain active.
C An auxiliary function that is not compatible
with the programme cannot be selected. (See
"Programme and consumption table")
C Auxiliary Function buttons may vary according
to the model of the machine.
• Prewash
A Prewash is only worthwhile for heavily soiled
laundry. Not using the Prewash will save energy,
water, detergent and time.
F1 appears on the display when you select this
function (a).
• Quick Wash
This function can be used in Cottons and Synthetics
programmes. It decreases the washing times and
also the number of rinsing steps for lightly soiled
laundry.
F2 appears on the display when you select this
function (b).
C When you select this function, load your
machine with half of the maximum laundry
specified in the programme table.
• Rinse Plus
This function enables the machine to make another
rinsing in addition to the one already made after the
main wash. Thus, the risk for sensitive skins (babies,
allergic skins, etc.) to be effected by the minimal
detergent remnants on the laundry can be reduced.
F3 appears on the display when you select this
function (c).
• Anti-Creasing
This function creases the clothes lesser when they
are being washed. Drum movement is reduced and
spinning speed is limited to prevent creasing. In
addition, washing is done with a higher water level.
F4 appears on the display when you select this
function (d).
• Rinse Hold
If you are not going to unload your clothes
immediately after the programme completes, you
may use rinse hold function to keep your laundry
in the final rinsing water in order to prevent them
from getting wrinkled when there is no water in the
machine. Press Start / Pause / Cancel button after
this process if you want to drain the water without
spinning your laundry. Programme will resume and
complete after draining the water.
If you want to spin the laundry held in water, adjust
the Spin Speed and press Start / Pause / Cancel
button.
The programme resumes. Water is drained, laundry
is spun and the programme is completed.
• Soaking
The Soaking auxiliary function ensures better
removal of stains ingrained into the clothes by
holding them in the detergent water prior to startup
of the programme.
Time display
Remaining time to complete the programme
appears on the display while the programme is
running. Tim is displayed as “ 01:30 ” in hours and
minutes format.
C Programme time may differ from the values
in the "Programme and consumption
table" depending on the water pressure,
water hardness and temperature, ambient
temperature, amount and the type of laundry,
auxiliary functions selected and the changes at
the mains voltage.
Delayed start
With the Delayed Start function the startup of
the programme may be delayed up to 24 hours.
Delayed start time can be increased by increments
of 30 minutes.
C Do not use liquid detergents when you set
Delayed Start! There is the risk of staining of the
clothes.
Open the loading door, place the laundry and put
detergent, etc. Select the washing programme,
temperature, spin speed and, if required, the
auxiliary functions. Set the desired delayed start
time by pressing the Delayed Start + or - buttons.
Delayed Start symbol flashes. Press Start / Pause
/ Cancel button. Delayed start countdown starts.
Delayed Start symbol illuminates steadily. Start
symbol appears. “:” sign in the middle of the
delayed start time on the display starts flashing.
C Additional laundry may be loaded during
the delayed start period. At the end of the
countdown, Delayed Start symbol disappears,
washing cycle starts and the time of the
selected programme appears on the display.
Changing the delayed start period
If you want to change the time during countdown:
Press Start / Pause / Cancel button. “:” sign in the
middle of the delayed start time on the display stops
flashing. Pause symbol appears. Delayed Start
symbol flashes. Start symbol disappears. Set the
desired delayed start time by pressing the Delayed
Start + or - buttons. Press Start / Pause / Cancel
button. Delayed Start symbol illuminates steadily.
Pause symbol disappears. Start symbol appears.
“:” sign in the middle of the delayed start time on the