Blomberg WNF 7402 WE20 - Manuel (Page 11)

11 EN
Special programmes
For specific applications, select any of the
following programmes.
• Rinse
Use this programme when you want to rinse or
starch separately.
• Spin + Drain
Use this programme to apply an additional spin
cycle for your laundry or to drain the water in the
machine.
Before selecting this programme, select the
desired spin speed and press Start / Pause /
Cancel button. The machine will spin the laundry
with the set spin speed and drain the water
coming out of them.
If you wish to drain only the water without
spinning your laundry, select the Pump+Spin
programme and then select the No Spin function
with the help of Spin Speed Adjustment button.
Press Start / Pause / Cancel button.
C Use a lower spin speed for delicate laundries.
Temperature selection
Whenever a new programme is selected,
the maximum temperature for the selected
programme appears on the temperature indicator.
To decrease the temperature, press the
Temperature Adjustment button. Temperature
decreases with increments of 10° and finally, “-”
symbol indicating the cold wash option appears
on the display.
C If you scroll to cold wash option and press
Temperature Adjustment button again, the
recommended temperature for the selected
programme appears on the display. Press
the Temperature Adjustment button again to
decrease the temperature.
Economy symbol
Indicates the programmes and temperatures that
provide energy savings.
C Economy symbol can not be selected in
Intensive and Hygiene programmes since
washing is performed in long times and
at high temperatures in order to provide
hygiene. Similarly, Economy symbol can not
be selected in Baby, Refresh, Drum Cleaning,
Spin and Rinse programmes as well.
Spin speed selection
Whenever a new programme is selected, the
recommended spin speed of the selected
programme is displayed on the spin speed
indicator.
To decrease the spin speed, press the Spin
Speed Adjustment button. Spin speed decreases
gradually. Then, depending on the model of the
product, "Rinse Hold" and "No Spin" options
appear on the display. See "Auxiliary function
selection" section for explanations of these
options.
C Rinse Hold option is indicated with “ ”
symbol and No Spin option is indicated with “
” symbol.