Black & Decker CG800C - Manuel (Page 8)

13 14
Important: Process foods no more than a few seconds at a time. Pulsing produces
excellent results and offers greater control.
8. When the food is processed to the desired consistency release the
ON/OFF (I/O)
button.
Important: Be sure chopping blade has completely stopped spinning before removing
workbowl from appliance.
9. Hold the workbowl securely and turn it counterclockwise to the
UNLOCK
position and keeping the bowl level, lower it from the appliance.
10. With your fingers on the top of the stem of the chopping blade, lift it up and out
of the workbowl with a twisting motion. Remove food using rubber spatula or
simply invert workbowl onto plate, bowl or work surface.
11. Unplug appliance when not in use.
HELPFUL TIPS FOR CHOPPING AND BLENDING
• The processor works very quickly. Watch carefully to avoid over-processing foods.
• For best results, process foods that are about the same size.
• Cool cooked foods before processing.
• Do not overload the processor by adding more than 1¼ cups of food in the
workbowl at one time.
• Use this processor to prepare small amounts of cooked fruits and vegetables for
baby food.
• Cut hard foods, such as chocolate, whole hard spices and cheese into smaller
pieces before processing to avoid damaging the blade.
Care and Cleaning
This product contains no user serviceable parts. Refer service to qualified service
personnel.
1. Remove the bowl from the mounted unit by twisting to the unlock position.
2. Carefully remove the blade from the bowl.
Important: Blades are sharp. Handle carefully.
3. The coffee grinding bowl, mini food processor workbowl and stainless steel
chopping and grinding blades can be washed in hot, soapy water.
4. Always rinse and dry parts thoroughly after cleaning
Important: Although these parts can be washed in the dishwasher, we recommend
they be washed by hand to preserve the sharpness of the blades and the appearance
of the workbowl. Do not immerse the appliance in water.
5. Wipe outside of appliance with a damp cloth; dry thoroughly.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
Grinder stops The ground coffee bowl Make sure the grinding bowl
working has disengaged. is correctly inserted into
There are too many beans the motor housing. Unplug
in the grinding bowl. the appliance and remove
some of the beans from the
grinding bowl.
Coffee tastes Grinder has buildup of Oil in the coffee beans
rancid. coffee grounds. will become rancid if left
in the grinder. Makes sure
there are no beans left in
the grinding bowl. Clean
the grinding bowl after
each use.
Coffee tastes like Grinder has been used for Grinder will share flavors;
nuts or spices. other grinding operations. purchase an additional
grinding bowl for spices
and nuts.
Appliance will Workbowl or grinding bowl Be sure the arrow on the
not start. is not correctly engaged in bowl is correctly aligned
the housing. with the LOCK signage on
Appliance may not be the housing and the bowl
plugged in. is completely integrated
The outlet is not working. and flush with the base
Check to make sure
appliance is plugged in
and outlet is working.
Food is unevenly Workbowl is over filled. Unplug the appliance and
chopped Food may be cut in remove some of the food
random sizes. from the workbowl.
Smaller amounts
will process more evenly.
Press the ON/OFF
button in 5 second or
fewer increments. Allow
the blades to stop
completely before pressing
the ON/OFF button again.
Check the size of the food
before continuing. Cut
food in same size pieces
before placing in
processor.