Rockwell Automation 1440-SDM02-01RA XM-124 Standard Dynamic Measurement Module - Manuel (Page 18)

18 XM-124 Standard Dynamic Measurement Module
Rockwell Automation Publication 1440-IN001B-EN-P - October 2013
DIP Switch Functions and Defaults
Switch Purpose Function Out-of-box
Default
Value Out-of-box
Switch
Setting
1 DIP switch
disable Determines whether DIP switches 3…10
are enabled. When this switch is in the off
position, DIP switches 3…10 set the
module’s node address and communication
rate. When the switch is on, the device
ignores DIP switches 3…10 and uses the
network address and communication rate
programmed in nonvolatile storage. Switches
enabled Off
2 Network
mode Sets the DeviceNet behavior of the module
to either Normal mode (ODVA compliant) or
Legacy mode, which is consistent with
earlier XM module versions. Normal (fully
compliant) On
3, 4 Data rate When switch 1 is off (0), the DeviceNet
communication rate is set. 125 Kbps Both off
5…10 Node
address When switch #1 is off (0), the DeviceNet
node address is set. 63 All on