CompuSTAR 2WFM (LCD) (Remote 2WFMR) Manuel d'utilisation

Page 6

Advertising
background image

Page 11

Page 10

If you do not want to set reservation mode, shut off the engine before you exit the
vehicle. The engine will shut off for the following reasons:

- You did not activate the parking brake or pressed the foot brake when you

turned the manual key to the off position.

- You released the parking brake while the engine was running.

- You entered Valet Mode after the Reservation Mode has been completed.

Canceling Reservation Mode

While the vehicle is in valet mode, only the keyless entry function will be available.
Valet Mode is very useful when loaning your vehicle or having it serviced.

In order to enter Valet mode, press buttons

( I + I I I )

simultaneously for a 1/2 second.

In order to manually enter Valet Mode, insert your key into the ignition and turn
the ignition on, then off,

(between ACC and ON)

five times within 7 seconds.

Valet Mode

You can exit Valet Mode only by pressing buttons

( I + I I I )

simultaneously for a 1/2 second.

Safety Shut Down Features

The CompuStar 2WFMR, 2WFMR-2

nd

system has several shut down safety features.

The following actions will shut down the engine or prevent the car from auto-starting :
opening the hood, pressing the brake, or if Valet Mode is turned on.

Turbo Mode

If this optional Turbo Mode has been programmed at the time of installation,

you can turn this feature on and off by pressing buttons

( I I I + I V )

for a 1/2 second.

In this mode, if the emergency brake has been set, the engine will continue to run
after the key has been taken out of the ignition. It will run until two minutes after the
emergency brake has been set.

To utilize this mode, the emergency brake sensing wire has to be connected to the
emergency brake wire of the vehicle. Consult the authorized dealer for this mode.

This option is ideal for turbo-charged vehicles because it allows the turbo too slowly
cool after operation.

2

nd

Car Mode

This Remote-Pager is able to operate a 2

nd

vehicle.

Press buttons

III&IV

simultaneously for 1/2 second. If this mode is turned to

2

nd

Car, the Remote-Pager will not communicate with the 1

st

vehicle.

To Exit 2

nd

Car press buttons

I I I & I V

simultaneously again.

(Consult your Authorized Dealer)

(

2WFMR

)

(

2WFMR-2

nd

)

Advertising