Philips 10000100 - Manuel (Page 29)

27
coffee
cleaning
cycle
maintenance
descaling
cycle
lock
display
MAINTENANCE
To clean/maintain all of the machine’s internal circuits, press the “maintenance” button on the main menu.
In this menu you can:
begin the wash cycle of the brew
group.
perform the descaling cycle.
begin rinsing the milk
circuits.
lock the Touch Screen (to
preform cleaning of the
display).
MILK CIRCUIT RINSE CYCLE
To rinse the machine’s internal circuits used for preparing milk.
This short cycle must be performed after 20 minutes from the last dispensing of a beverage with milk.
If the rinsing cycle is not performed, the machine comes to a halt and does not allow the dispensing of beverages.
Before performing this function make sure that:
1. a large enough container is positioned under the spout.
2. the milk container has been adequately cleaned of all milk residue and contains fresh drinking water.
3. the water tank contains a suffi cient quantity of water.
Press the "milk rinsing cycle" button and then "start rinsing" to start the milk circuit rinse cycle.
Wait for the cycle to fi nish.
The machine will return to the main
menu. Remove the container, rinse and
dry.
milk
cleaning
cycle
milk
rinsing
cycle
begin washing the milk
circuits.
rinsing...
rinsing milk department-
please wait
milk
rinsing
cycle
start
rinsing
go back
back to
menu