Dispensing hot milk – Philips 10000100 Manuel d'utilisation

Page 15

Advertising

hot

milk

DISPENSING HOT MILK

Press the hot milk icon once.

The hot milk is dispensed.

start

rinsing

milk rinsing cycle

rinse the milk tank

Remove the milk container from the
machine; if it sill contains milk, put it
back in the refridgerator
for later use and substitute the
additional container.
Rinse the container and ﬁ ll with fresh
water, place it in the machine and
press the “start rinsing”
button.

rinsing...

rinsing milk department-

please wait

While the machine is rinsing the
user cannot interrupt the cycle,
but must wait until the cycle is
completed. Once completed the
machine returns to the main menu.

THIS PROCEDURE MUST BE PERFORMED FOR ALL
MILK PRODUCTS!

Remove the container, rinse
and dry.

If the user wishes to continue preparing other drinks the machine
will keep the “milk rinsing” signal active.

After 20 minutes of inactivity, the machine requires the user to
perform a rinsing cycle as described in Step 7. If the machine is
turned off immediately after dispensing a milk product, the next
time the machine is turned on it will require the user to perform a
rinsing cycle.

Note: Before performing the “milk rinsing” function, make sure of
the following:
1. and adequate zised container is placed under the brew unit.
2. the milk container with the cappuccinatore is ﬁ lled with fresh

drinking water and inserted in the machine.

3. the water tank is full of fresh water.

Fill the milk container

To dispense another cup of milk,
repeat this operation.
When the "milk rinsing" symbol
ﬂ ashes, clean the milk circuits as
described for latte macchiato (see
page 12, Step 6).

show icon

explanation

my custom

coffee

program-

ming

menu

stop
milk

dispensing

milk

cleaning