Philips 10001708 - Manuel (Page 35)

33
7
13
8 9
10 11 12
14
When the solution is fi nished the
following message appears on
the display:
Remove the water tank, rinse
with fresh drinking water to
eliminate traces of the descaling
solution, then refi ll with fresh
drinking water.
Insert the tank with fresh
drinking water.
Rinse the machine’s circuits by
pressing the key. The machine performs the rinse
cycle. During the rinse cycle, the
machine may require the water tank
to be fi lled.
The machine begins to dispense
the descaling solution through the
hot water spout. The dispensing
occurs at predetermined intervals,
in order to allow the solution to be
more effective. The intervals are displayed as
shown above in order to check the
status of the descaling process.
Once the rinse cycle is fi nished the
following screen appears.Remove
the tank, install the “Aqua Prima”
water fi lter again (if desired) and fi ll
it with fresh drinking water.
Turn the knob until it is in the
rest position ( ).
When descaling is complete,
return to the main menu to
dispense beverages.
boiler descaling cycle boiler descaling cycle
fi ll water tank
fi ll the water tank with fresh
water
boiler cleaning cycle
fi ll water tank
show
text
8:30 am
15/06/06
go to
menu