Philips 10001708 - Manuel (Page 29)

27
STAND-BY SETTINGS
You can set the amount of time the machine waits after the last dispensing to go into stand-by mode.
The default setting is «after 3 hours».
Press “stand-by settings”.
1.3.3. stand-by settings
after 3 hours
after 15 min after 30 min
after 1 hour
When the set time has elapsed, the machine goes
in stand-by.
To exit stand-by mode, press “start”. After warming
up and performing a self-test, the machine is once
again ready for use.
Date format
To set the date view mode. The modification of this setting adjusts all the parameters that require viewing/setting
the date. Press “date format”.
1.3.2.2. date format
mm/dd/yy
date format
dd/mm/yy
American
format
dd/mm/yy
International
format
yy/mm/dd
stand-by
settings
after 3 hours