Breville Juice Fountain Crush BJS600XL - Manuel (Page 21)

20
TROUBLESHOOTING
POSSIBLE PROBLEM EASy SOLUTION
Juicer will not work
or suddenly turns off
during juicing
• Check that the power plug is securely inserted into
wall outlet.
• Insert the power plug into an independent outlet.
• Insert the power plug into a different outlet.
• Reset the circuit breaker if necessary.
• Ensure the juicer is assembled correctly.
• The Overload Protection may have automatically de-
activated the motor. Unplug the power cord from the wall
outlet and allow the appliance to cool for at least 1 hour.
Insufficient cooling time may result in the motor
de-activating again. After sufficient cooling time,
reconnect the power cord to the wall outlet, press the
reset button under the base of the motor and recommence
normal use.
Motor appears to stall
when juicing • The Electronic Protection device will automatically
de-activate the motor if the motor is stalled. Unplug the
power cord from the wall outlet and clear the Feed Chute.
Either too much food is being processed at one time or the
pieces are not small enough. Try trimming food, cutting
food into smaller pieces of even size and/or processing a
smaller amount per batch. Then reconnect the power cord
to the wall outlet and recommence normal use.
• Ensure the motor is running before loading the feed chute
with food.
• Hard fruits and vegetables will put excess strain onto
the motor.
Reduced juice
extraction • Stop the juicing process and remove the power cord
from the wall outlet. Use the provided nylon brush to
thoroughly clean the fine mesh holes of the Filter Basket.
Brush the inside of the Filter Basket under running water,
holding it up towards a light to ensure the fine mesh
holes are not blocked. If the holes are blocked, soak the
Filter Basket in hot water with 10% lemon juice to loosen
the blocked holes. Cleaning the Filter Basket will remove
excess fiber build up (from juicing the fruit or vegetables)
which could be inhibiting the juice flow.