Blue Rhino CPSV003589 - Manuel (Page 6)

Page 5 Model# CPSV003589 Page 5 1.888.753.7137 Page 6
To complete assembly you will need:
• 1 precision-filled standard grill LP gas tank (20#)
with external valve threads
• 4 oz. leak check solution - mix 1 part dishwashing
soap with 3 parts water
1. Assemble Cart Frame
• Slide front section of cart frame into rear section
of frame.
• Attach with bolts, washers and nuts as shown.
• Hand tighten securely.
2. Attach Engine to Post
• Place engine onto post.
• Press down until the snaps engage.
• Slide WaveDrawer
™ into engine.
• Position FineTune ® ring and lure in place.
3. LP Gas Tank
• Place full LP gas tank on cart.
• Connect gas line to tank by turning knob clockwise
until it stops.
• Turn tank ON and test for leaks:
• Spoon leak check solution where knob and tank
valve connect.
• If any bubbles appear turn tank OFF, reconnect
and re-test.
• If no bubbles appear after one minute turn tank
OFF, wipe away solution
and proceed.
• Wrap cover around tank and attach to frame.
4. Attach Rain Cover
• Place rain cover over engine and tank.
• Secure in place by twisting FineTune
® lock
clockwise until it stops.
Quick & Easy Assembly
Tip: to locate a retailer in your neighborhood
that provides precision-filled tanks,
visit www.bluerhino.com or call toll free
1.800.258.7466.
X
X
X
X
X