Blue Rhino CPSV003589 - Manuel (Page 11)

Page 9 Model# CPSV003589 Page 9 1.888.753.7137 Page 10
Maintenance
3
4
5
6
7
8
2. Clean Air Passages
• Remove rain cover, sticky trap, FineTune ®
ring and lure.
• Locate all screws and/or bolts that connect
engine cover to engine body. See
illustration 3.
Note: certain models require you to cut a
hole through the labels.
• Remove engine cover by removing screws
and/or bolts and unplugging lighting.
See illustration 4.
• Spray dirty engine body, fan area and
engine cover with glass cleaner (i.e.
Windex
® ) or a citrus based degreaser. See
illustration 5.
NOTICE – Never use cleaning fluid or
petroleum based fuels and avoid contact with
LED lighting and fan motor to avert damage.
• Allow cleaners to soak in then wipe all
surfaces clean and dry with a cloth. See
illustration 6. If there is stubborn build-up,
remove it by scrapping with a plastic knife.
See illustration 7.
• Reconnect LED lighting and plastic engine
cover. Replace sticky trap, FineTune ® ring,
lure and rain cover.
3. Clean Turbo Scoop
• Remove WaveDrawer ™ and remove engine
from post or cart.
• Remove plastic plug in bottom of metal
engine by reaching up through exhaust
hole. See illustration 8.
• Turn engine head upside down to remove
debris from turbo scoop.
• Replace plastic plug. Place engine back on
post or cart and replace WaveDrawer ™ .
4. Reconnect regulator to tank by turning
clockwise. Perform leak test before re-
starting.