Breville The Juice Fountain Duo BJE820XL - Manuel (Page 27)

27
TROUBLESHOOTING
POSSIBLE PROBLEM EASy SOLUTION
Juice leaks between the
rim of the Juicer Cover
and the filter Bowl
Surround
• Try a slower juicing action by pushing the food pusher
down slower. Fruit and vegetables with a high water
content (tomatoes and watermelon) should be juiced on
low speed or by using the Puree Disc.
Juice sprays out too fast
from Juice Spout • Try a slower juicing action by pushing the food pusher
down slower.
When using Puree disc
the filter Bowl Surround
becomes full and clogs the
spout on the filter Bowl
Surround. • Try using fruits with more water content to help flush
through the contents. Additionally, try a slower juicing
action by feeding one piece in at a time and by pushing
the food pusher down more slowly.
Juicer suddenly turns off
during juicing
• The juicer has been stressed by overloading or stalling.
Juicer will automatically activate the overload protection
button and the unit will turn itself off. When this
happens it is recommended that the unit is turned off
and unplugged. Then press the Overload Protection
Button found on the bottom of the Motor Base. The
safety device will then be reset and the Breville Juice
Fountain™ Duo is ready for use again.
Red light flashing • This may indicate that the motor has been stressed by
Overheating with excessive load. The Juicer is fitted
with a self-resetting safety device which safeguards
against overheating on the motor with excessive loads.
If overheating occurs, the juicer will automatically
activate the overheating protection device and the motor
will turn itself off. When the overheating protection is
activated, unplug the juicer from power outlet for at least
15 minutes to allow the unit to cool. Then plug juicer
into the power outlet and use as normal.
• The Juicer will automatically stop operating if the
motor is stalled. If this occurs, the light surrounding
the Start|Stop button will flash red. This is an electronic
safety feature. Either too much food is being processed
at one time or the pieces are not small enough. Try
trimming food, cutting food into smaller pieces of even
size and/or processing a smaller amount per batch. To
continue juicing, unplug the juicer from power outlet,
reset the Juicer by pressing the Start|Stop button to
OFF, then clear the feed chute, plug the juicer in and
finally turn the appliance back on by pressing the
Start|Stop button to ON.