Whirlpool WTW4900BW - Manuel (Page 9)

9
Wash Temp Suggested Fabrics
8.
Select WASH TEMP
Once you select a cycle, select the desired wash temperature
by turning the Wash Temp knob to the desired setting.
Always read and follow fabric care label instructions to avoid
damage to your garments.
9.
Select cycle options, if desired
If you would like to add an extra rinse, fabric softener or
extra soak period to any cycle, turn the knob to desired
setting.
10.
Press START/Pause
to begin wash cycle
Press the START/Pause button to start the wash cycle. When
the cycle has finished, the DONE indicator will light. Promptly
remove garments after cycle has completed to avoid odor,
reduce wrinkling, and rusting of metal hooks, zippers, and
snaps.
Unlocking the lid to add garments
If you need to open the lid to add 1 or 2 missed garments:
Press START/Pause; the lid will unlock once the washer
movement has stopped. This may take several minutes if the
load was spinning at high speed. Then close lid and press
START/Pause again to restart the cycle.
If lid is left open for more than 10 minutes the water will pump
out automatically.
Cool
Warm water is added to assist in
soil removal and to help dissolve
detergents.
Dark colors that
bleed or fade
Light soils
Hot
Some cold water is added to save
energy. This will be cooler than
your hot water heater setting.
Warm
Some cold water will be added, so
this will be cooler than what your
previous washer provided.
Cold
Warm water may be added to
assist in soil removal and to help
dissolve detergents.
Whites and pastels
Durable garments
Heavy soils
Bright colors
Moderate to light soils
Colors that bleed
or fade
Light soils
Dark colors that
bleed or fade
Light soils
Tap Cold
This is the temperature from your
faucet.
7.
Select SOIL LEVEL
Once you select a cycle, select the desire soil level by turning
the Soil Level knob to the desired setting.