Whirlpool WTW4900BW - Manuel (Page 8)

8
5.
Add fabric softener, if desired
To dispense fabric softener in the rinse cycle,
this washer has been designed to allow the use of the Downy
Ball ®† dispenser. Pour a measured amount of Downy ® liquid
fabric softener into the Downy Ball ® dispenser, pull the ring
tightly to seal it, and place on top of load. Always follow
manufacturer’s directions for correct amount of fabric softener
based on your load size. Then select 1 Rinse with Softener
option. The Downy Ball ® dispenser will automatically release
the fabric softener during the rinse cycle. For questions on
using the Downy Ball ® dispenser call 1-800-688-7638 or visit
www.downy.com.
IMPORTANT: Rinse option must be selected to 1 Rinse
with Softener or 2 Rinses with Softener to ensure proper
distribution at correct time in cycle. Do not overfill or dilute.
Adding Liquid Fabric Softener Manually to Wash Load
During the final rinse, wait until the washer has completed
filling, press the START/Pause button to pause the washer.
Lift the lid and add the measured recommended amount of
liquid fabric softener. Do not allow liquid fabric softener to spill,
splash, drip, or run into the basket or on load. Do not use more
than the recommended amount. Close the lid and press the
START/Pause button again to start the washer.
4.
Add liquid chlorine bleach
to dispenser, if desired
Liquid
Chlorine Bleach
Do not overfill, dilute, or use more than 1 cup (250 mL). Do
not use color-safe bleach or Oxi products in the same cycle
with liquid chlorine bleach.
Turn cycle knob to choose your wash cycle.
6.
Select cycle
For best performance, load garments
in loose heaps evenly around the
washplate. Try mixing different sized
garments to reduce tangling.
IMPORTANT: Garments need to move
freely for best cleaning and to reduce
wrinkling and tangling.
3.
Load laundry into washer
†®Downy and Downy Ball are registered trademark of The Proctor & Gamble Company.