Whirlpool WGT3300XQ - Manuel (Page 17)

17
Turn on water faucets to check for leaks. A small amount of
water may enter washer. It will drain later.
6.
Check for leaks
Secure drain hose to laundry tub leg, drain standpipe, or inlet
hoses for wall standpipe with shipping strap removed earlier.
7.
Secure drain hose
4.5"
(113 mm)
4.5"
(113 mm)
4.5"
(113 mm)
4.5"
(113 mm)
4.5"
(113 mm)
Laundry Tub Standpipe Wall
If you are working in a closet or recessed area: move the
washer/dryer into its final location and remove cardboard
from under washer/dryer. Remove the outer access panel by
removing 3 Phillips-head screws and one bumper, located at
the top of the access panel. Remove inner access panel by
removing clip, cover, and 2 screws. Set panels, screws,
clip, inner access panel cover, and bumper aside. Complete
hookup of water hoses and vent. Replace access panels upon
completion of washer/dryer installation.
5.
Move washer/dryer to final location
Outer Access Panel Inner Access Panel
4.5"
(114 mm)
4.5"
(114 mm)
4.5"
(114 mm)