Prepare the dishwasher, Caster installation – Whirlpool WDP350PAAB Manuel d'utilisation

Page 4

Advertising
background image

4

Put dishwasher on its back

2

Dishwasher door frame

Grasp sides of dishwasher door frame and put dishwasher on its
back.

Attach casters

3

Caster

Firmly push casters into holes at corners of dishwasher as shown.
Pull on each caster to check that casters are snug.

Helpful Tip: It may be helpful to place a piece of wood between
the caster wheels and then lightly tap the wood with a hammer.

PREPARE THE DISHWASHER

Excessive Weight Hazard

Use two or more people to move and install
dishwasher.

Failure to do so can result in back or other injury.

Tip Over Hazard

Do not use dishwasher until completely installed.

Do not push down on open door.

Doing so can result in serious injury or cuts.

Stand dishwasher upright

1

Beaded foam

shipping pieces

Stand dishwasher upright. Open door and remove shipping foam,
cardboard tower and any other shipping materials. Close
dishwasher door. Latch dishwasher door shut.

Excessive Weight Hazard

Use two or more people to move and install
dishwasher.

Failure to do so can result in back or other injury.

CASTER INSTALLATION

Put 2 corner posts on floor
behind dishwasher

1

Corner post

Advertising