Whirlpool W10495945 - Manuel (Page 5)

5
Cutout Height is between 41 ¹³⁄₁₆" (106.2 cm) and 42¼"
(107.3 cm)
1. Using 2 or more people, place the combo oven on its back on
a covered surface.
2. Install one of the rear feet (Part Number W10318219) on the
left rear spacer using a #8-18 x ½" screw.
NOTE: Position the rear foot so the long side of the foot is
facing toward the top of the oven.
3. In the same manner, install the other rear foot (Part Number
W10318219) on the right rear of the oven.
4. Install the front foot (Part Number W10471952) on the left
front spacer using a #8-18 x ½" screw.
NOTE: Position the front foot so the long side of the foot is
facing toward the inside of the oven.
5. In the same manner, install the front foot (Part Number
W10471956) on the right front of the oven.
6. Using 2 or more people, place the oven in its upright position.
7. Go to the “Make Electrical Connection” section of the
Installation Instructions that came with the product.
Cutout Height is between 42
⁷⁄₈" (108.9 cm) and
43 ⁵⁄₁₆" (110.0 cm)
1. Using 2 or more people, place the oven on its back on a
covered surface.
2. Install one of the rear feet (Part Number W10318219) on the
left rear spacer using a #8-18 x ½" screw.
NOTE: Position the rear foot so the short side of the foot is
facing toward the top of the oven.
A. Spacer
B. Rear foot
C. #8-18 x ½" screw
A. Front foot
B. #8-18 x ½" screw
C. Spacer
A
B
C
A
B
C
A. Spacer
B. Rear foot
C. #8-18 x ½" screw
C
B
A