Whirlpool WFW80HEBW - Manuel (Page 10)

10
8.
Select CYCLE*
The display will show the default settings for the selected
cycle. To adjust a setting, touch its name – Wash Temp, Spin,
Soil, or Extra Rinse. Adjusting settings will change the Estimated
Time Remaining. Tightly packing the load, unbalanced loads, or
excessive suds may also cause the washer to increase the cycle
time.
Turn cycle knob to select your wash cycle. See “Cycle Guide”
for details on cycle features.
9.
Adjust settings, if desired*
10.
Select any additional options*
To add an option to the cycle, touch its name – Extra Rinse,
TumbleFresh, or Cycle Signal. To remove an option from
the selected cycle, touch the option again.
Appearance may vary.
Appearance may vary.
Appearance may vary.
* Not all options and settings are available with all cycles.
See “Cycle Guide” for available options and settings.
11.
Setting a delayed wash
If you do not want to begin a cycle immediately, you may
choose the DELAY WASH option. This will delay the start
of the wash cycle by up to 12 hours.
To set a delayed wash:
1. Touch DELAY WASH + and – buttons to set the desired
delay time.
2. Touch and hold START to set the delay. The delay
countdown has started when the START light stops blinking.
Appearance may vary.
USING YOUR WASHER