Whirlpool WGI925C0BS - Manuel (Page 9)

9
The number on the surface cooking area heat setting display will
flash if no pan is placed on the surface cooking area, or the pan is
not made of the right material, or it is not the right size. It will stop
flashing once a suitable pan is placed on the surface cooking
area. If you take longer than 30 seconds to place the correct pan
on the surface cooking area, the surface cooking area will turn off.
If there is no activity for 90 seconds, the cooktop will turn off.
Ideal cookware should have a flat bottom, straight sides and a
well-fitting lid, and the material should be of medium-to-heavy
thickness.
Choose the correct pan size for each surface cooking area. The
diameter of the pan’s base should correspond to the size of the
surface cooking area.
NOTE: Cookware manufacturers often give the diameter across the
top of the pan. This is usually larger than the diameter of the base.
Pans with rough finishes may scratch the cooktop.
Home Canning
Canning can be performed on the induction cooktop. See the
“Cookware” section to check if the canner will work on the
induction cooktop. When canning for long periods, alternate the
use of surface cooking areas or elements between batches. This
allows time for the most recently used areas to cool.
■ Center the canner on the largest surface cooking area or
element. On electric cooktops, canners should not extend
more than ½" (1.3 cm) beyond the surface cooking area or
element.
■ Do not place canner on 2 surface cooking areas or elements
at the same time.
■ On ceramic glass models, use only flat-bottomed canners to
avoid damage to the cooktop and elements.
■ For more information, contact your local agricultural
extension office, or refer to published home canning guides.
Companies that manufacture home canning products can
also offer assistance.
ELECTRONIC OVEN CONTROLS
This manual covers different models. The range you have purchased may have some or all of the items listed. The locations and
appearances of the items shown here may not match those of your model.
Display
When power is first supplied to the range, or if a power failure has
occurred, 12:00 will appear on the display. See the “Clock”
section to set time of day.
When the oven is not in use, the display shows the time of day.
Cancel
Cancel stops any function except the Clock, Timer and Control
Lock.
Oven Lights
While the oven doors are closed, press the Oven Light icon on
the keypad to turn the lights on and off. Both oven lights will
come on when either door is open. The oven lights will not come
on during the Self-Clean cycle.
A. Upper oven settings
B. Cook time
C. Start time
D. Oven display
E. Number keypad
F. Upper oven start
G. Timer set/off
H. Settings
I. Upper oven cancel
J. Lower oven cancel
K. Lower oven start/control lock
L. Oven light
M. Clock
N. Steam Clean
O. Precise Clean
P. Lower oven settings
A D E F G H I
J K L M N O P
B C