Range hood use, Complete installation, Range hood controls – Whirlpool WVW75UC6DS Manuel d'utilisation

Page 10

Advertising
background image

10

Secure the bottom of the duct with 2 - 4.2 x 8 mm screws.

Complete Installation

1. For non-vented (recirculating) installations only, install

charcoal filters over metal grease filter. See the “Range Hood
Care” section.

2. Install metal filters. See the “Range Hood Care” section.

3. Check the operation of the range hood blower and light. See

the “Range Hood Use” section.

NOTE: To get the most efficient use from your new range hood,
read the “Range Hood Use” section.

RANGE HOOD USE

The range hood is designed to remove smoke, cooking vapors and
odors from the cooktop area. For best results, start the hood
before cooking and allow it to operate several minutes after the
cooking is complete to clear all smoke and odors from the kitchen.

The hood controls are located on the front side of the canopy.

Range Hood Controls

Operating the LED task light

The On/Off light button controls both lights. Press once for On
and again for Off.

Operating the blower

The Blower Speed buttons turn the blower on and control the
blower speed and sound level for quiet operation. The speed can
be changed anytime during fan operation by pressing the desired
Blower Speed button.

The Blower Off button turns the blower Off.

Operating the Ambient Lighting

The switch controls the ambient lighting.

1. Press to the left to turn AUTO On.

2. Press to the right to turn AMBIENT LIGHTING On.

3. Press to the center to turn AMBIENT LIGHTING or AUTO Off.

NOTE: When the Ambient Lighting is placed in the AUTO setting,
a sensor will automatically sense if it is dark in the area around the
range hood. The Ambient Lighting will turn on and stay on until it
senses there is enough light in the area around the range hood, or
the Ambient Lighting switch is placed in the ON or OFF position.

A. Louver holes (non-vented

[recirculating]
installations only)

B. Duct cover

C. Control panel
D. Light switch (ambient

lighting)

E. Glass canopy

F. Perimetric cover

G. LED lights

H. Metal grease filters (located

behind the perimetric cover)

A

B

C

D

E

F

G

H

A. On/Off LED task light button
B. Blower Off button

C. Blower speed minimum button
D. Blower speed medium button

E. Blower speed maximum button

A

B

C

D

E

Advertising
Ce manuel est liée aux produits suivants: