Pioneer X-NM1 - Manuel (Page 31)

31
En
8 Using the timer
English
• If the record timer has been set, see Activating/
deactivating the timers on page 33 for limitations with
using the timers concurrently.
• After setting the timer, playback starts according to
the most recent changes to the CD play mode or the tape
direction.
• Repeat and random playback can’t be used with the
wake up timer.
• If the AC power is cut (blackout, accidentally
unplugging the power cord), the system will return to
the 12:00 clock display and both the timer and clock will
have to be set again for the timer to work.
• The timer won’t work if the clock isn’t set!
SLEEP TIMER AUTO
SLEEP TIMER ?
SLEEP TIMER 9O
SLEEP TIMER 6O
SLEEP TIMER 3O
SLEEP TIMER OFF
WAKE UP / REC
TIMER SET UP ?
While the sleep timer is in operation, press TIMER
( SLEEP / TIMER ) to see the remaining time until the
system shuts off.
To cancel the sleep timer, switch the system into standby,
or select
SLEEP OFF (as described above).
• If you are recording a radio broadcast to the tape
recorder, the
SLEEP AUTO option can be selected.
• The SLEEP AUTO option is not available if you're
playing a CD in repeat mode. When is set for the
tape reverse mode, playback stops after 2 sides.
• The sleep timer won’t work if the clock isn’t set.
* confirmation display
only
Cancels the sleep
timer
Switch off after 30
minutes
Switch off after 60
minutes
Switch off after 90
minutes
Switch off after the
source (CD or tape)
has played out
Using the sleep timer
The sleep timer switches the system into standby after a
specified amount of time so that you can fall asleep
without worrying about the stereo being left on all night.
If you've also set the wake up timer this is important,
since the wake up timer will only work if the system is in
standby.
• During playback or recording, press
TIMER (SLEEP/TIMER) repeatedly to cycle
through the sleep timer options.
Wake up and record
timers (see pages 30
and 32 for more)