Amana TANDEM W10410362A - Manuel (Page 3)

3
CONTROL PANEL AND FEATURES
WASH CYCLE KNOB
Turn the Wash Cycle knob to select a cycle for your laundry
load. See “Cycle Guide” for detailed descriptions of cycles
that best suit your load.
TEMP
Temperature Control senses and maintains uniform
water temperatures by regulating incoming hot and
cold water.
Select a wash temperature based on the type of fabric
and soils being washed. For best results and following
the garment label instructions, use the warmest wash
water safe for your fabric.
• Warm and hot water will be cooler than what your
previous washer provided.
• Even in a cold water wash, some warm water may
be added to the washer to maintain a minimum
temperature.
CYCLE SIGNAL
This cycle signal is helpful when you are removing items
from the washer as soon as it stops. Select ON or OFF.
START/PAUSE BUTTON
Press and hold to start a cycle, or press once while a cycle
is in process to pause and press again to continue the cycle.
If you do not press START/PAUSE within 5 minutes of
choosing a cycle, the washer automatically shuts off.
POWER BUTTON
Press to turn the washer on and off. Press again to STOP/
CANCEL a cycle at any time.
1
2
3
4
STATUS INDICATORS
The Status Indicators show the progress of a cycle. At each
stage of the process, you may notice sounds or pauses
that are different from traditional washers.
ADD GARMENT
When Add Garment is lit, you may pause the washer,
open the door, and add 2 or 3 additional items.
WASH
This is the main portion of the wash cycle. You will see the
washer tumble the load. The motor sounds may change at
different stages in the cycle. The wash time is determined
by the selected cycle, along with your load size.
RINSE
You will hear sounds similar to the wash cycle as the
washer rinses and moves the load.
SPIN
The washer spins the load at increasing speeds for
proper water removal, based on the selected cycle
and spin speed.
COMPLETE
Once the cycle is complete, this light will come on.
Remove the load promptly for best results.
DOOR LOCK
The Door Lock avoids unintended use of the washer.
When Door Lock is lit, all buttons are disabled except for
Start/Pause, Power, and Cycle Signal.
5
6
Not all features and options are available on all models.
Appearance may vary.
3
4 5
6
1
2