Yorkville FH2W - Manuel

w w w . y o r k v i l l e . c o m
Yorkville Sound
550 Granite Court
Pickering, Ontario
L1W-3Y8 CANADA
Canada
Voice: (905) 837-8481
Fax: (905) 837-8746
Yorkville Sound Inc.
4625 Witmer Industrial Estate
Niagara Falls, New York
14305 USA
U.S.A.
Voice: (716) 297-2920
Fax: (716) 297-3689
Printed in Canada
1
Yorkville FH2
C12/C15 Flying Hardware
The FH2 hardware kit has been specifically designed to expand the C12 and C15’s
already advanced mounting capabilities. A single FH2 installation kit is the ideal rigging
solution for installing Yorkville Sound Coliseum Series C12 or C15 speakers. This kit has
been built for hanging solo cabinets or two-enclosure arrays.
The staggered hole pattern on the FH2 allows for a multitude of tilt angles simply by
moving the shackle towards front or the rear of the bracket. If a greater down-tilt angle is
required, simply add an eye-bolt to the pullback point located on the rear of the cabinet.
When using C12 or C15 cabinets in two cabinet arrays, the FH2 splays the loudspeakers
at the ideal angles to minimize interference and acoustic lobing.
IMPORTANT!! The rigging of loudspeaker systems is an extremely serious matter!
Overhead rigging requires extensive experience, including (but not limited to) calculating
working load limits, hardware installation, and periodic safety inspection of all hardware
and cabinetry. If you lack these qualifications, do not attempt the installation yourself,
but instead use a professional structural rigger. Improper installation can result in bodily
injury or death. Consult a structural engineer to calculate added loads upon the building.
Structural reinforcement may be necessary to insure a safe installation.
Flying Arrays
A single FH2 kit can be used to attach
two cabinets together in a horizontal array
increasing dispersion and helping the cabi-
nets cover a wider area.
Mounting the FH2 Bracket
on Individual Enclosure
The FH2 bracket has been designed to allow
either individual or multiple enclosures to be
flown. In order to fly an individual enclosure,
follow these simple instructions.
Kit Includes
1 FH2W (white) or FH2B (black) Bracket
1 Z1389 Support Plate
1 Z1390 Support Plate
8 YS#8974 1/4-20 X 1 1/4 HEX HEAD BOLT
8 YS#8489 1/4-20 SPLIT WASHER BLACK OXIDE
Flyware Bracket System
YS#8974 x8
YS#8489 x8
Z1389W or Z1389B
Z1390W or Z1390B
FH2W(white) or FH2B (black)