Yorkville MC12D - Manuel (Page 7)

5
mc
12
d
4. L&R Inserts
The L&R Insert ¼-inch TRS (stereo) jacks each acting as a send and a return (Tip=send,
Ring=return) to permit patching EQ, compressor/limiter, etc. directly into the main mix out-
puts using ‘Y’ insert cables such as the Apex A210SPY or A210SXY.
5. Media In
The Media In L&R RCA jacks go to the Media In master, which feeds the main buss
(post Master) and can be used to connect the output of a second mixer or program
source. Use balanced or unbalanced cables.
6. Media Out
The Media Out L&R RCA jacks are controlled by the Media Out master control. This is the
main mix and can be connected to the input of another mixer or recording medium using
balanced or unbalanced cables.
7. Mono Out
The Mono Out provides a main mix output regulated by the Mono Out Master control
which is ideally suited for connecting a subwoofer amplifier. Use a balanced or unbal-
anced cable.
8. Monitor Out
The Mon 1 & Mon 2 ¼-inch outputs are controlled by their respective Mon Send master
controls. Use balanced or unbalanced cables.
9. Phantom Power Active LED
The Phantom Power Active LED indicates that phantom power is available on all Mic
inputs. The Phantom Power Active switch is located on the same back panel as the AC
switch and cable socket.
Note: phantom power will not interfere with the performance of most dynamic mics.
10. Headphone Output Jack
The Headphone Output jack enables the connection of
standard stereo headphone which help to monitor all
Input channels plus Main, Monitor, EFX and Aux busses. If
no Solo switches are engaged, only the L&R Main mix will
be present in the phones.
11. Lamp Connector
A standard BNC-mount gooseneck lamp such as our
GNL-600, 12-Volt incandescent lamp or GNL-101 LED
lamp can be used.
Master Controls
1. Media In and Out Master Controls and
Clip LEDs
The Media In and Out Master controls regulate the input
and output levels at their respective Media In and Media
Out jacks. Reduce the level of the appropriate Media In
master control when the Clip LED illuminates continually.
2. Mon 1 and Mon 2 Send Controls, Solo and
Clip LEDs
The Mon 1 and Mon 2 Send controls regulate the level of
their respective monitor busses going to the Mon 1 and 2
Out jacks. The Solo buttons isolate their respective moni-
0
5
2 8
7
6 4
3
9 1
10 0
5
2 8
7
6 4
3
9 1
10
Media IN Media OUT
Level Level
Clip Clip
0
5
2 8
7
6 4
3
9 1
10
0
5
2 8
7
6 4
3
9 1
10
0
5
2 8
7
6 4
3
9 1
10
0
5
2 8
7
6 4
3
9 1
10
0
5
2 8
7
6 4
3
9 1
10
0
5
2 8
7
6 4
3
9 1
10
0
5
2 8
7
6 4
3
9 1
10
0
5
2 8
7
6 4
3
9 1
10
EFX Aux
Bal
Mon 1
EFX Rtn
Mon 2
EFX Rtn
Mon 1
Send
EFX
Send
Mon 2
Send
Aux
Send
Clip
Clip
Solo
Solo
Solo
Solo
Clip
Clip