Westwood Design Meadowdale Convertible Crib (Production dates before 1/1/2011) - Manuel (Page 9)

Day Bed Conversion
A. Remove the 4 bolts attaching the footboard to the crib, and remove the
footboard. Save all hardware for future reassembly of your crib.
B. Screw the removable feet into the bottom of the crib sides.
C. Adjust the spring to its lowest position, following the procedure in Step 2.
D. Insert the allen bolt through the hole in the corner post, and thread it into the
cap nut as shown. Tighten securely using the allen wrench.
E. Repeat with the other three holes.
Required Hardware
4 x Allen Bolt, 1-1/8” Long (O)
Allen Wrench (Q)
Cap Nut (P)
Allen Bolt (O)
Cap Nut (P)
Removable Foot (C)