Westwood Design Meadowdale Convertible Crib (Production dates before 1/1/2011) - Manuel (Page 5)

Step 1
A. Position the stabilizer bars so that the holes face the inside of the crib.
B. Place a barrel nut in the hole, with the slot aligned horizontally.
C. Place a washer on the bolt, then put the bolt through the crib side and thread
it into the barrel nut.
D. Use the allen wrench to securely tighten the bolt.
E. Repeat with the remaining 7 holes.
Required Hardware
8 x Barrel Nut (I)
8 x Allen Bolt, 2-3/4” Long (J)
8 x Nylon Washer (M)
Allen Wrench (Q)
Crib Side (D)
Nylon Washer (M)
Allen Bolt (J)
Barrel Nut (I)
Stabilizer Bar (G)
Crib Side (E)