Panasonic NT-ZP1V - Manuel (Page 11)

10 11
English
How to Clean
 Clean the appliance after every use.
 Unplug and make sure the appliance is cooled down completely.
Note
● Do not use benzine, thinner, alcohol, bleach, polishing powder, metal brush or nylon brush, otherwise the surface
will be damaged.
● Do not wash in a dishwasher.
Interior
Shake the main body lightly to allow crumbs inside to fall
onto the crumb tray.
To avoid breaking down.
● Do not turn upside-down and shake.
(It may cause malfunction.)
● Do not insert any instruments into the insertion slots.
Exterior
Wipe with a well-wrung cloth.
Crumb Tray
Wash with diluted dish soap (neutral) and
a soft sponge.
Problem Cause
The lever does not lock when
it is lowered.
q The power plug is not plugged in.
 Plug it in firmly.
q Toasting bread consecutively.
 When operating the toaster for more than 4 cycles, rest the toaster
for more than 1 minute after each cycle.
The browning control, defrost
and reheat buttons do not
work.
q The toast lever is not lowered.
 Select either button after lowering the toast lever.
q The browning control button does not work while reheating function is
on.
Bread does not pop up after
toasting is finished.
q The bread is deformed.
q The bread is too large or too small.
q The bread is too thick.
 Lift the lever up manually.
Use the appropriate size of bread. (P.7)
Toasting color is too dark or
too light.
q The browning control is not set appropriately.
q Toasting bread consecutively.
 When operating the toaster for more than 4 cycles, rest the toaster
for more than 1 minute after each cycle.
Troubleshooting
● Please check the following before requesting service.
NT-ZP1
Power supply 120 V 60 Hz
Power consumption 850 W
Dimensions (W  D  H) (approx.) 29.8  16.0  19.5 cm (11.7  6.2  7.7 inches)
Mass (approx.) 2.7 kg (6.0 lb.)
Length of the power cord (approx.) 0.9 m (35.4 inches)
Specifications