Adjusting the listening position, Dm+ advanced – Sony CDX-GT57UP Manuel d'utilisation

Page 19

Advertising
background image

19

Optimizing sound by Time
Alignment — Listening
Position

The unit can simulate a natural sound field
by delaying the sound output from each
speaker to suit your position.
The options for “POSITION” are indicated
below.

You can also set the approximate subwoofer
position from your listening position if:
– the audio output is set to “SUB-OUT”

(page 20).

– the listening position is set besides “OFF.”

The options for “SET SW POS” are
indicated below.
NEAR

(

): Near

NORMAL

(

): Normal

FAR

(

): Far

1

During reception/playback, press the
select button.

2

Rotate the control dial until “SET
POSITION” appears, then press it.

3

Rotate the control dial to select from
“FRONT L,” “FRONT R,” “FRONT” or
“ALL,” then press it.

4

Rotate the control dial until “SET SW
POS” appears, then press it.

5

Rotate the control dial to select the
subwoofer position from “NEAR,”
“NORMAL” or “FAR,” then press it.

6

Press

(BACK).

To cancel listening position, select “OFF”
on step 3.

Adjusting the listening
position

You can fine-tune the listening position
setting.

1

During reception/playback, press the
select button.

2

Rotate the control dial until “ADJ
POSITION” appears, then press it.

3

Rotate the control dial to adjust the
listening position, then press it.
Adjustable range: “+3” – “CENTER” –
“–3.”

4

Press

(BACK).

DM+ Advanced

DM+ Advanced improves digitally
compressed sound by restoring high
frequencies lost in the compression process.

1

During playback, press the select
button.

2

Rotate the control dial until “DM+”
appears, then press it.

3

Rotate the control dial to select “ON,”
then press it.

4

Press

(BACK).

Tip

The DM+ setting can be memorized for each
source.

FRONT L

(

): Front left

FRONT R

(

): Front right

FRONT

(

): Center front

ALL

(

): In the center of

your car
OFF

: No position set

Advertising