Selecting the sound quality — eq7 preset, Customizing the equalizer curve — eq7 setting – Sony CDX-GT57UP Manuel d'utilisation

Page 18

Advertising
background image

18

*1 Hidden when “SET POSITION” is set to

“OFF.”

*2 When the audio output is set to “SUB-OUT”

(page 20).

*3 When AUX source is activated (page 21).

Enjoying sophisticated sound
functions — Advanced Sound Engine

Advanced Sound Engine creates an ideal in-
car sound field with digital signal
processing.

Selecting the sound quality
— EQ7 Preset

You can select an equalizer curve from 7
equalizer curves (XPLOD, VOCAL, EDGE,
CRUISE, SPACE, GRAVITY, CUSTOM or
OFF).

1

During reception/playback, press the
select button.

2

Rotate the control dial until “EQ7
PRESET” appears, then press it.

3

Rotate the control dial until the desired
equalizer curve appears, then press it.

4

Press

(BACK).

To cancel the equalizer curve, select “OFF”
in step 3.

Tip

The equalizer curve setting can be memorized for
each source.

Customizing the equalizer
curve — EQ7 Setting

“CUSTOM” of EQ7 allows you to make
your own equalizer settings.

1

Select a source, then press the select
button.

2

Rotate the control dial until “EQ7
SETTING” appears, then press it.

3

Rotate the control dial until “BASE”
appears, then press it.
You can select an equalizer curve as a
basis for further customizing.

4

Rotate the control dial to select the
equalizer curve, then press it.

5

Setting the equalizer curve.

Rotate the control dial to select the

frequency range, then press it.

BAND1: 63 Hz
BAND2: 160 Hz
BAND3: 400 Hz
BAND4: 1 kHz
BAND5: 2.5 kHz
BAND6: 6.3 kHz
BAND7: 16.0 kHz

Rotate the control dial to adjust the

volume level, then press it.
The volume level is adjustable in 1 dB
steps, from -6 dB to +6 dB.

Repeat steps

 and  to adjust other

frequency ranges.

6

Press

(BACK) twice.

The equalizer curve is stored in
“CUSTOM.”

SW LEVEL

*

2

(Subwoofer Level)

Adjusts the subwoofer volume level:
“+10 dB” – “0 dB” – “–10 dB.”
(“ATT” is displayed at the lowest
setting.)

AUX VOL

*

3

(AUX Volume level)

Adjusts the volume level for each
connected auxiliary equipment: “+18
dB” – “0 dB” – “–8 dB.”
This setting negates the need to adjust
the volume level between sources.

Advertising