Sony CDX-GT930UI - Manuel (Page 14)

14
Tuning automatically
1
Select the band, then push the multi
way encoder left/right to search for the
station.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.
Tip
If you know the frequency of the station you want to
listen to, push and hold the multi way encoder left/right
to quickly locate the approximate frequency, then push
the multi way encoder left/right repeatedly to fine
adjust to the desired frequency (manual tuning).
Receiving a station through a list
— LIST
You can list up the frequency.
1
Select the band, then push
(BROWSE)/CAT.
The preset list appears.
2
Rotate the multi way encoder until the
desired station appears.
3
Press the multi way encoder to receive
the station.
The display returns to normal reception
mode.
CD
Playing a disc
1
Press Z.
2
Insert the disc (label side up).
3
Close the front panel.
The front panel slides up automatically, then
playback starts automatically.
Ejecting the disc
1 Press Z.
The front panel slides down automatically,
then the disc is ejected.
2 Press Z to close the front panel.
Display items
A Source (CD/MP3/WMA/AAC) indication
B Clock
C Artist name/Album name, Track name, Folder
number/Track number/Elapsed playing time
To change display items C, press
(DSPL/SCRL).
Tip
Displayed items will differ depending on the disc type,
recording format and settings.
Repeat play
1
During playback, press (1) (REP) on
the card remote commander until the
desired setting appears.
* When an MP3/WMA/AAC is played.
To return to normal play mode, select “Repeat
off.”
Select To play
Repeat Track track repeatedly.
Repeat Album* album repeatedly.
A B
C