Radio, Storing and receiving stations, Storing automatically - btm – Sony CDX-GT930UI Manuel d'utilisation

Page 13: Storing manually, Receiving the stored stations, Radio storing and receiving stations

Advertising
background image

13

1

Press (ZAP) during playback.
After “ZAPPIN” appears in the display,
playback starts from a passage of the next
track.
The passage is played for the set time, then a
click sounds and the next passage starts.

2

Press the multi way encoder or (ZAP)
when a track you want to listen is
played back.
The track that you select returns to normal
play mode from the beginning.
To search a track by ZAPPIN mode again,
repeat steps 1 and 2.

Tips
You can select the playback time from about 6

seconds/9 seconds/30 seconds (page 20).You
cannot select the passage of the track to playback.

Push the multi way encoder left/right in ZAPPIN

mode to skip a track.

Push the multi way encoder up/down in ZAPPIN

mode to skip album.

Pressing

(BACK) also confirms a track to

playback.

Radio

Storing and receiving stations

Caution

When tuning in stations while driving, use Best
Tuning Memory (BTM) to prevent an accident.

Storing automatically — BTM

1

Press (SOURCE) repeatedly until
“TUNER” appears.
To change the band, press (MODE)
repeatedly. You can select from FM1, FM2,
FM3, AM1 or AM2.

2

Press and hold the multi way encoder.

3

Rotate the multi way encoder until
“BTM” appears, then press it.
The unit stores stations in order of frequency
in the preset list.
A beep sounds when the setting is stored.

Storing manually

1

While receiving the station that you
want to store, push

(BROWSE)/CAT.

The preset list appears.

2

Rotate the multi way encoder to select
the preset number.

3

Push and hold the multi way encoder
until “MEM” appears.

(with the card remote commander)

1

While receiving the station that you
want to store, press and hold a
number button (
(1) to (6)) until
“MEM” appears.

Note
If you try to store another station on the same number
button, the previously stored station will be replaced.

Receiving the stored stations

1

Select the band, then push the multi
way encoder up/down.

(with the card remote commander)

1

Select the band, then press a number
button (
(1) to (6)).

ZAP

1

1

2

2

3

3

4

4

The part of each track to
playback in ZAPPIN mode.

Track

Advertising