Sony MEX-BT5700U - Manuel (Page 26)

26
Calling from the call history in this
unit
1 Rotate the control dial to select “Recent Call,”
then press the select button.
2 Select a name and number from the call
history.
3 Select “Call.”
Note
You can call from the call history of this unit only.
Calling by phone number input
1 Rotate the control dial to select “Dial,” then
press the select button.
2 Input the phone number using number buttons,
the control dial or card remote commander.
3 Select “Yes.”
To input “+,” press and hold the 0 button on the
card remote commander.
Calling by preset number
You must store a phone number to the Preset Dial
beforehand (page 28).
1 Press (1) - (6) with the “Bluetooth Phone”
source selected.
2 Select “Yes.”
Presetting the volume of ring tone
and talker’s voice
You can preset the volume level of the ring tone
and talker’s voice.
To adjust the ring tone:
Rotate the control dial while the phone is ringing.
“Ring Volume” appears and ring tone volume is
set.
To adjust the talker’s voice:
Rotate the control dial with the “Bluetooth
Phone” source selected. “Talk Volume” appears
and the talker’s voice volume is set.
Sending DTMF (Dual Tone Multiple
Frequency) tones
You can send DTMF tones.
To send DTMF tones, press the required number
buttons (0 – 9, or
) on the card remote
commander during a call.
To end a call
Press (handsfree) again, or (OFF).
Note
Even if the call is ended, the Bluetooth connection is
not canceled.
Mic Gain adjustment
You can switch the volume levels (“–2,” “–1,”
“0,” “+1,” “+2”) to set a suitable level for the
other party during a call.
Tip
If you set “Auto Answer” to on, the phone call is
automatically started in the set time (page 22).
Receiving calls
When receiving a call, ring tone is output from
your car speakers.
1
Press (handsfree) when a call is
received with a ring tone.
The phone call starts.
Note
The Built-in Microphone of this unit is located on the
rear of the front panel (page 10). Do not cover the
microphone with tape, etc.
To reject a call
Press (OFF).
Call transfer
In order to activate/deactivate the appropriate
device (this unit/cellular phone), check the
following.
1
Press (MODE) or use your cellular
phone.
For details on cellular phone operation, refer to
your cellular phone manual.
Note
Depending on the cellular phone, handsfree
connection may be cut off when call transfer is
attempted.