Acoustic Research AWD205 - Manuel (Page 4)

G
ettInG
S
tarted
4
Supplied Accessories
This headphone system includes accessories that enable you to use
your wireless headphone set in a number of ways.
AC power adapter
Headphone
charging cable
Wireless headphones
2.4GHz wireless
transmitter
2 AAA rechargeable batteries
Installing the Headphone Batteries
1. Twist the left headphone’s earpad cover counter-clockwise to
expose the battery compartment.
2. Insert the two (2) rechargeable AAA batteries (included) in the
left headphone, following the polarity (+ and –) diagram inside the
compartment.
3. Place the earpad back on the left headphone and twist it clockwise
to lock it back into place.
Important: DO NOT mix batteries with different chemistry types (for example, a zinc
battery with an alkaline battery). DO NOT mix new and used batteries. DO NOT
leave
batteries installed in the product when not in use for long periods. Always remove old,
weak or worn-out batteries promptly and recycle or dispose of them in accordance with
local and national regulations.
Important: If you are using rechargeable batteries NiMH or NiCd (such as the
batteries provided), the batteries will charge when the headphones are connected
to the transmitter using the charging cable. DO NOT connect the headphones to the
transmitter with the charging cable if you installed alkaline or other non-rechargeable
batteries – this could cause the batteries to leak, which would damage the headphones.