Samsung PN63A760T1FXZA - Manuel (Page 8)

English - 8
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
➢ It may take a little while before you see a full picture.
Turning the TV On and Off
Viewing the Menus
1 With the power on, press the MENU button.
The main menu appears on the screen. The menu’s
left side has icons:
Picture, Sound, Channel, Setup, Input,
Application.
2 Press the ▲ or ▼ button to select one of the icons.
Then press the ENTER button to access the icon’s
sub-menu.
➢ To move to a lower menu, turn the wheel
clockwise when the menu Display is on the
screen. To move to a higher menu, turn the
wheel counterclockwise.
3 Press the EXIT button to exit.
➢ It takes about one minute until the on-screen
menu disappears.
Your TV can memorize and store all of the available
channels for both air and cable channels. After the
available channels are memorized, use the CH RETURN
TOOLS
INFO
W.LINK
CH LIST
EXIT
or CH
RETURN
TOOLS
INFO
W.LINK
CH LIST
EXIT
button to scan through the channels. This eliminates
the need to change channels by entering the channel
digits. There are three steps for memorizing channels:
selecting a broadcast source, memorizing the channels
(automatic) and adding and deleting channels (Channel
Lists).
Memorizing the Channels
Selecting the Video Signal-source
2 Press the ENTER button to select Antenna.
Press the ▲ or ▼ button to select Air or Cable,
then press the ENTER button. Press the EXIT
button to exit.
Storing Channels in Memory
(Automatic Method)
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then
press the ENTER button.
2 Press the ▲ or ▼ button to select Auto Program,
then press the ENTER button.
Before your television can begin memorizing the
available channels, you must specify the type of signal
source that is connected to the TV (i.e. an Air or a
Cable system).
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then
press the ENTER button.
Mode : Standard
Cell Light : 7
Contrast : 95
Brightness : 45
Sharpness : 50
Color : 50
Tint (G/R) : G50/R50
Detailed Settings
Picture
Antenna : Air
Auto Program
Clear Scrambled Channel
Channel List
Fine Tune
Signal Strength
Air
Cable
Channel
Channel
Antenna : Air ►
Auto Program
Clear Scrambled Channel
Channel List
Fine Tune
Signal Strength
Channel
Antenna : Air
Auto Program ►
Clear Scrambled Channel
Channel List
Fine Tune
Signal Strength
Auto Program
Select the Antenna source to memorize.
Air
Cable
Auto
Return Enter Move
Start
Start
Start
BN68-01654A-Eng.indd 8 2008-07-02 오후 5:26:49