Care and cleaning of the oven, Oven vent, Cleaning painted parts and decorative trim – Samsung NE58H9970WS-AA Manuel d'utilisation

Page 74: Cleaning stainless steel surfaces

Advertising
background image

CARE AND CLEANING OF THE OVEN

WARNING

Be sure all controls are OFF and all surfaces are COOL before

cleaning any part of the range.

If your range is moved for cleaning, servicing,

or any reason, be sure the Anti-Tip device

is re-engaged properly when the range is

replaced. If you fail to re-engage the Anti-Tip

device, the range could tip and cause serous

injury.

Oven vent

Oven vent

• The oven vent is located

below the control box.

• This area could become hot

during oven use.

• It is normal for steam to

come out of the vent.

• The vent is important for

proper air circulation. Never

block this vent.

Cleaning painted parts and decorative trim

• For general cleaning, use a cloth with hot and soapy water.
• For more difficult residue and built-up grease, apply a liquid detergent directly

onto the area and leave for 30 to 60 minutes. Wipe with a damp cloth and dry. Do

not use abrasive cleaners on any of these surfaces. They can scratch.

Cleaning stainless steel surfaces

1. Shake the bottle of Stainless Steel Appliance Cleaner or polish well.
2. Place a small amount of Stainless Steel Appliance Cleaner or polish on a damp

cloth or damp paper towel.

3. Clean a small area, rubbing with the grain of the stainless steel if applicable.
4. Dry and buff with a clean, dry paper towel or soft cloth.
5. Repeat as necessary.

Do not use a steel-wool pad. It will scratch the surface.
• If a mineral oil-based stainless steel appliance cleaner has been used

before to clean the appliance, wash the surface with dishwashing liquid

and water prior to using the Stainless Steel Appliance Cleaner or polish.

English - 74

Manual Users_NE58H9970WS_AA_AC_DG68-00550A-00_EN.indd 74

19/05/2014 18:21:37

Advertising